The current MAHA MPJ (MAHA Pit Jack) series represents a completely new, modular, and high-tech generation of axle and transmission jacks. It is engineered for precise, safe, and heavy-duty operation within the pits of modern workshops servicing light commercial vehicles, heavy-duty trucks, buses, and special machinery.
1. Technology and Model Configurations
The entire series is developed on a modular principle, allowing the chassis design, drive type, and the number of piston stages to be combined according to specific workshop needs.
Classification by Drive Type:
- HM (Hand-Manual): Fully manual hydraulic drive via a two-stage pump (fast stroke without load and power stroke under load).
- HA (Hydro-Pneumatic): Foot-pedal operated hydro-pneumatic drive. It utilizes compressed air from the workshop line for a lightning-fast approach stroke and an air motor for precise lifting under load.
- HAE (Hydro-Pneumatic External): An ergonomic version featuring a remote pneumatic control unit connected via a long hose, keeping the operator clear of the piston area.
Classification by Chassis (Suspension) Type:
- Suspended (Standard): Mounted on the top edge of the pit and running along factory-installed rails, leaving the pit floor completely clear.
- TA (Traversing / Floor-runnable rail-guided): A low-profile chassis that runs on rails installed at the bottom of the pit. This allows the technician to walk freely over the jack.
- FA (Floor-running / Freely Movable): Floor-based jacks equipped with free-rolling caster wheels. When a load exceeding 1000 kg is applied, the wheels automatically retract, allowing the chassis to settle stably directly onto the concrete floor.
Classification by Piston Design:
- 1S (1 Stage): A single-stage piston (750 mm stroke) designed for shallow or standard pits handling conventional lifting tasks.
- 2S / 3S (2 / 3 Stages): Two- and three-stage telescopic pistons (1200 mm stroke) featuring an ultra-low minimum height—ideal for deep pits and removing heavy gearboxes/transmissions.
2. Full List of Products and Models in the Series
- Light Range (Up to 4.0 tons):
- MPJ 4.0/750 1S HM (VP 254032) – Manual, suspended model.
- MPJ 4.0/750 1S HA (VP 254033) – Hydro-pneumatic, suspended model.
- Medium-Heavy Range (Up to 16.5 tons):
- MPJ 16.5/750 1S (Modifications: HM / TA / HA / FA / HAE) – 1-stage piston, 750 mm stroke.
- MPJ 16.5/1200 2S (Modifications: TA / HA / FA) – 2-stage telescopic piston, long 1200 mm stroke.
- MPJ 16.5/1200 3S (Modifications: TA / FA) – 3-stage telescopic piston, 1200 mm stroke with ultra-low carriage profile.
- Heavy Range (Up to 20.0 tons):
- MPJ 20.0/750 1S (Modifications: TA / HM / HA / FA) – Ultra-powerful 1-stage jacks with a large piston diameter.
- Specialized Machinery:
- GMT 800 (VP 975915) – Specialized hydraulic transmission jack with an 800 kg capacity.
3. Comprehensive Technical Specifications Table
|
Technical Parameter
|
MPJ 4.0 Range
|
MPJ 16.5/750 Range
|
MPJ 16.5/1200 Range
|
MPJ 20.0 Range
|
|
Nominal Load Capacity
|
4,000 kg (4.0 t)
|
16,500 kg (16.5 t)
|
16,500 kg (16.5 t)
|
20,000 kg (20.0 t)
|
|
Piston Stages
|
1 Stage (1S)
|
1 Stage (1S)
|
2 or 3 Stages (2S/3S)
|
1 Stage (1S)
|
|
Maximum Piston Stroke
|
750 mm
|
750 mm
|
1200 mm
|
750 mm
|
|
Piston Diameter
|
45 mm
|
70 mm
|
70 / 100 / 140 mm
|
80 mm
|
|
Support Adaptor Hub
|
Ø 45 mm
|
Ø 45 mm
|
Ø 45 mm
|
Ø 45 mm
|
|
Drive Type (Model specific)
|
Manual (HM) / Air (HA)
|
Manual / Air
|
Compressed Air (HA)
|
Manual / Air
|
|
Required Air Pressure
|
8 - 10 bar
|
8 - 12 bar
|
8 - 12 bar
|
8 - 12 bar
|
|
Hydraulic Oil Volume
|
approx. 5 liters
|
approx. 7 liters
|
approx. 11 - 13 liters
|
approx. 9 liters
|
|
Max. Operating Pressure
|
255 bar
|
430 bar
|
430 bar
|
400 bar
|
4. Options and Accessories for the MPJ Series
- Self-Locking Axial Crossbeam (SAT 14.5 / SAT 20.0): The most critical safety accessory. It mounts on the piston head and expands outwards, allowing simultaneous dual-point lifting (left and right side of the axle) while providing robust mechanical support.
- Telescopic / Adjustable Chassis: Allows the factory carriage wheels to be micro-adjusted to perfectly match the precise width of your pit rails during installation.
- U-Profile Custom Rollers: Swaps the standard flanged wheels for custom rollers designed to sit within U-shaped steel beams or wall-guided profile tracks.
- Piston Rod Extensions (Stackable Sleeves): Sets of certified extensions available in heights of 50, 100, 150, and 200 mm to bridge the gap to high-clearance truck frames.
- Specialized Support Attachments: V-shaped prisms for gripping differential housings, rubber-padded U-shaped supports for longitudinal frame rails, and curved adaptors for round axles.
Gearbox / Transmission Support Plate: A specialized heavy-duty tilting stage that swaps onto the piston tip, allowing precise tilt adjustment when removing or mounting heavy transmissions.